Product ID: BT-LST-12000G |
|
Commercial Reverse Osmosis System - 12000G ( BT-LST-12000G)
Commercial and Industrial RO Water Filter Systems Standard Features:
Capacity (Minimum): 12000 GPD (2000 L/hr)
Motor: 5.0 HP
1. 5 Micron Prefilter
2. Adjustable Pump PSI
3. Pressure Pump Start Delay Recycle Adjustable
4. Low Feed Pressure Shut Down/Alarm
5. Liquid-Filled Pressure Gauge : Pre-filter & Membrane Feed Permeate Flowmeter
6. Conductivity Controller
Commercial Reverse Osmosis Systems Providing quality,demineralized water at a fraction of the operating costs of deionizers. ROs reduce dissolved solids, bacteria, pyrogens, and organics. All systems are heavy-duty,preassembled, and tested before delivery, Reverse Osmosis systems are designed and manufactured for dependable service. All pumps are 316 stainless steel for durability and have a diffuser-type design for a smooth pulse free and quiet operation. The electronic control panel is protected .
included to provide the greatest efficiency from a Dayton Water Systems RO unit. RO units can be custom-designed if the standard product line does not meet your required flow rate or other requirements. we can customize absolutely everything tailored to the customer's water chemistry and ambient operating conditions.
| P/N |
Model |
Capacity (Minimum) |
Membrane Quantity |
Dimensions L x W x H (cm) Inlet Pipe |
Inlet Pipe(Inch) |
Motor |
| LST-12000 |
LST-12000G |
12000 GPD (2000 L/hr) |
4040 x 8 |
160 x 90 x 135 |
1-1/4 |
5.0HP |
|
pressure booster commercial water
|
| |
Specifications:
- Feed water temperature: (Fahrenheit)85deg . maximum.
- Feed water pressure: 35 psi minimum / 85 psi maximum.
- PH range: 4 - 12.
- Turbidity - must be removed.
- Iron: maximum tolerance 0.5 ppm (dissolved only).
- Hardness: over 10 gpg should be softened.
- Hydrogen sulfide: 98% nominal.
- Electrical:
- 110V, 60 HZ (50 HZ available on request)
- 220-440V, 60HZ (50 HZ available on request).
- Test conditions:
- Operating pressure 200 psi
- design temperature:(Fahrenheit)77deg.(25deg)
- membranes: Thin film composite
|
Features:
- Stainless steel frame.
- TFC membranes.
- Stainless steel R.O. membrane vessels.
- High pressure pump.
- PLC controls.
- Power on / off switch.
- 5 microns pre-filter.
- Product water flow meter.
- High pressure gauge.
- Low pressure switch.
|
|
| |
Contact Detail |
CEO:Mr. Steven
Sales Contact:Manager Steven
Address:No.24-1, Housheng Rd., Shengang Township,Taichung County 429, Taiwan (R.O.C.)
TEL:886-4-23917899
FAX:886-4-25630726
Email:boost@boostersys.com
URL:http://www.boostersys.com
|
|
