RO Booster Pumps For is for a 70~100 PSI pump with a 300 GPD capacity.
N.W.:2.3 Kg
transformer: input:ac110V/60HZ or 230V/50HZ
output:dc24V/2A
inlet"0":by pass 130 PSI
prime:Self-priming up to 2~3 meter
this pump requires a transformer and pressure switch to operate properly! this item is the pump only! no transformer or tank pressure switch is included.
This low voltage booster pump is designed to operate continuously at near constant pressure until the product water tank is full.
The output pressure is dependent on the reverse osmosis system's total flow requirement, These booster pumps are to be installed on the raw water line feeding the RO unit.
If you have low water pressure on the raw water line feeding the RO unit,this booster pump will increase your water pressure so the RO unit will make RO water at a faster rate, for storage in the RO tank. The absolute rule of reverse osmosis purification is, the more PSI the better the flow and recharge rate, and the better the rejection rate.
Model
Voltage
Pressure
power
Ports NPT(Inch )
SH-5345-300
DC 24V
70~100PSI
300 GPD
18NPT (3/8)
or
RO Booster Pumps
or
Features:
WITH TRANSFORMER:
INPUT:AC110V/60HZ OR 230V/50HZ
OUTPUT:DC 24V/2A
INLET“0”:BY PASS 130 PSI
PRIME:Self-priming up to 2~3 meter
N.W.:2.3 Kg
Contact Detail
CEO:Mr. Steven Sales Contact:Manager Steven Address:No.24-1, Housheng Rd., Shengang Township,Taichung County 429, Taiwan (R.O.C.) TEL:886-4-23917899 FAX:886-4-25630726 Email:boost@boostersys.com URL:http://www.boostersys.com
